CE6T Hybrid In-ear Earphone
$359.00
CatchEar CE6T Hybrid IEM Earphone 2DD+3BA+1BCD 6‑Drivers 4‑Way Crossover In‑Ear Monitor with Tuning Switches
🔹Key Points
🎵 6‑Driver Hybrid 2DD+3BA+1BCD 4‑way crossover
🎛️ 2 Tuning Switches 4 sound modes adjustable
🔌 0.78mm 2‑Pin Detachable 4‑strand OCC cable
🖨️ 3D Printed Resin Ergonomic comfortable wearing
🔹Product Overview
CatchEar CE6T is high‑end hybrid in‑ear monitor earphone built with 2 dynamic drivers, 3 balanced armatures and 1 piezoelectric ceramic bone conduction unit. Adopt 4‑way crossover 4‑channels architecture, frequency response covers 10Hz‑30kHz to restore rich music details. 3D‑printed imported resin cavity with hand‑polished luminous shell panel. Two physical tuning switches support four sound modes. 0.78mm 2‑pin detachable 4‑strand single crystal copper cable, great for audiophiles, stage monitoring, music appreciation and game playing.
🔹6‑Drivers Hybrid Architecture
‑ Low frequency: 2× opposed active balanced pressure‑relief 7.5mm dynamic driver, non‑textured PU suspension edge + titanium dome diaphragm
‑ Mid frequency: 2× customized balanced armature drivers for natural human vocal
‑ High frequency: 1× customized balanced armature driver
‑ Ultra‑high frequency: 1× 12mm piezoelectric ceramic bone conduction transducer
‑ 4‑Way Crossover 4‑Channels: Each driver works on independent channel, avoid signal mixing & distortion.
🔹4 Tunable Sound Modes via 2 Switches
Switch1 OFF + Switch2 OFF：Standard Original
Tuning Switch1 ON, Switch2 OFF：Boost Low Frequency
Switch1 OFF, Switch2 ON：Boost High Frequency
Switch1 ON + Switch2 ON：Full‑Frequency Boost Mode
🔹Craftsmanship & Ergonomic Wearing
Cavity uses imported resin with 3D‑printing process for precise internal acoustic structure, lightweight and skin‑friendly. Luminous shell‑mixed panel is hand‑polished with night‑time visibility. Over‑ear wearing design reduces auscultation effect, stable for sports, stage performance and long‑time listening. Custom panel & private custom ear‑mold service are available for personalized upgrade.
🔹0.78mm 2‑Pin Detachable Cable
Equipped with original 4‑strand single crystal copper cable for low‑loss audio transmission. 0.78mm 2‑pin universal interface supports cable replacement & upgrade. Extend service life; you can try different sound signatures by swapping aftermarket IEM cables.
🔹Specifications
Model：CatchEar CE6T
Driver Unit：2DD+3BA+1BCD,6‑Driver Hybrid,4‑Way 4‑Channel
Impedance：13 Ω
Sensitivity：106 dB
Frequency Response：10Hz‑30kHz
Interface：0.78mm 2‑Pin
Plug Option：3.5mm /4.4mm
Cable：4‑strand Single Crystal Copper Cable
🔹Wide Application
Ideal for Hi‑Fi audiophile listening, stage in‑ear monitoring, live band performance, drummer monitoring, gaming, office use, commuting travel, studio recording, watch movie , sports , and daily commute.
🔹Package Contents
‑ 1 × CatchEar CE6T Earphone
‑ 1 × 4‑strand OCC Detachable Cable
‑ 3 pairs S/M/L Silicone Eartips
‑ 1 × Wire clip
‑ 1 × Cleaning brush tool
‑ 1 × Leather‑style storage carry case
‑ 1 × User Manual
🔹Precautions
‑ Do NOT pull the cable hard when plugging or unplugging, hold the metal connector instead of pulling wire body, to avoid internal wire breakage.
‑ Keep earphone away from water, moisture, high temperature and corrosive liquid, water damage is not covered under warranty. ‑ Do not listen at excessive volume for long time, to prevent hearing damage.
‑ Regularly clean the nozzle and eartips with the included cleaning brush, earwax blockage will cause sound attenuation or distortion.
‑ When installing 0.78mm 2‑pin cable, align pin position correctly, do not insert forcibly, wrong insertion may damage the pins.
‑ The tuning switches are small toggle parts, please operate gently, do not poke with sharp objects.
‑ Avoid heavy dropping, collision or squeezing the resin cavity, which may cause shell crack or internal unit damage.
‑ Keep product out of reach of small children, small accessories may cause choking hazard.
🔹After‑sales Support
‑ ✅ Strict quality inspection before shipment for every unit.
‑ ✅ Manufacturer warranty for non‑artificial damage (please refer to store warranty rules).
‑ ✅ Fast reply for product technical & usage questions.
‑ ✅ If you receive defective / damaged item, please contact us within 7 days after receiving parcel, provide photos/videos for support.
‑ ⚠️ Warranty does NOT cover: man‑made breakage, cable pulling damage, water ingress, dropping & scratch caused by user.
🔹Frequently Asked Questions FAQ
Q1: Can CE6T work well with smartphone directly?
A1: Yes. Impedance 13Ω & sensitivity 106dB, easy to drive by mobile phone, music player, DAP, sound card.
Q2: What is function of the two side switches?
A2: Switch1 for low‑frequency boost; Switch2 for high‑frequency boost. Four total sound modes for different music taste.
Q3: Can I use third‑party replacement cables?
A3: Yes, standard 0.78mm 2‑pin connector, most universal 0.78 2‑pin IEM upgrade cables are compatible.
Q4: Do you support custom panel / private ear‑mold service?
A4: Yes, custom panel and private mold service available, please send message to us for details & quotation.
Q5: The sound becomes weak / leak noise, what should I do?
A5: Please check whether eartips fit tightly your ear canal, or clean nozzle wax blockage with the included cleaning brush.